fbpx

Clearing the air with the .01 Micron Superstar Filter

According to Walmec North America, the .01 Micron SuperStar Filter has a .01 micron rating, with flow ranges of 50 SCFM, 75 SCFM, or 100 SCFM, and can handle pressure ratings of up to 250 PSI.

Toronto, Ontario — November 16, 2017 — Walmec North America recently released a new product: the .01 Micron Superstar Filter. The filter is a four stage filtration system that is designed to provide clean, dry, compressed air resulting in the removal of any vapors and contaminates down to .01 micron.

The first and second stage filters are able to remove moisture, liquids, dust, rust, scale, and other contaminants to 5 microns, according to Walmec. An automatic float drain under the second stage filter opens and expels all collected liquids whenever an ounce or more is present. It is fully automatic with no continuous air loss.

The third and fourth stages remove any remaining particles down to .01 microns and absorb any remaining vapors.

The .01 Micron SuperStar Filter includes a differential pressure gauge and comes with mounting brackets. The differential pressure gauge provides a visual indication of required maintenance, which, according to Walmec, is easily done by installing the appropriate service kit. No need to remove the unit from the compressed air system.

According to Walmec North America, the .01 Micron SuperStar Filter has a .01 micron rating, with flow ranges of 50 SCFM, 75 SCFM, or 100 SCFM, and can handle pressure ratings of up to 250 PSI. The .01 Micron SuperStar Filter works best when it is installed at, or near the point of use.

Walmec North America understands the importance of improving and extending the life cycle of tools and equipment. According to the company, the .01 Micron SuperStar Filter is an ideal solution for applications that require the highest standard of compressed air. They state that it is easy to install, use, and maintain.

For more information on the .01 Micron Super Star Filter call Walmec North America toll free at: 866-764-8377 or visit their website at www.walmecna.com.

SHARE VIA:
Facebook
LinkedIn
Twitter
Email

Sign-up for the Collision Repair daily e-zine and never miss a story –  SUBSCRIBE NOW FOR FREE!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Days
Hours
Minutes
Seconds